ABOUT US
  • At the present time, the demands of modern production are particularly high. There is much produced - with complex tasks. With high safety awareness and little budget. And even less time and staff. Panther took into consideration and found an intelligent solution to these problems. The Foxy Pro, a unique and patented crane concept. The next step of filmmaking.
    Foxy Pro Flyer
    Foxy Pro Quick Info
    Foxy Pro Manual
  • Our modified John Deere Pro Gator is capable of carrying any crane up to 30’ – 45 ft. It was designed with the Grip and Camera departments in mind. It is a fully self-contained unit including onboard battery power for the crane, remote head and monitors. The Extreme Gator has multiple storage opportunities so you can go off the beaten path with everything you need to shoot. When the going gets very rough the optional counter weight location lowers the center of gravity to make even the most severe terrain manageable. In addition the Extreme Gator has a hydraulic leveling post and screw jack for the base.
  • The design of this Head allows to use variety of film and digital cameras (up to IMAX cameras). Extra wide TILT frame provides greater space for additional camera equipment. Easy balancing technology allows to save rigging time. There are several control options such as Handwheels, Joystick and Pan Bar.
  • OVERVIEW: The Active Milli stabilized remote head from Opertec provides the same solid, reliable stabilization found in the Active Head in a small form factor.  The Active Milli is ideal for articulating arm applications.  It balances in minutes and its robust motors deliver tack sharp responsiveness to operator inputs.
  • SPECS: Length 15’5” Width 6’9” 9000 lbs Any size crane up to 60’ can be mounted onto the crane.
  • OVERVIEW: Handwheel, joystick and panbar operating systems Fully Encodable Broadcast ready Various camera cars Will support most 3-D rigs, remote heads and cameras Skilled and professional technicians
  • The new Oculus stabilized camera gimbal easily transcends the capabilities of competing systems, and presents new and unique aesthetic opportunities for directors and directors of photography in the motion picture industry.
  • OVERVIEW: The Active stabilized remote head from Opertec is by far one of the most rugged systems on the market today.  The form factor and robust motors of the Active Head can move the largest cameras and lenses with pin point accuracy and ease.  The Active Head balances in minutes and is ready for the most aggressive stabilization requirements you can throw at it.
  • OVERVIEW The Scorpio Stabilized Head can be controlled two ways:
    • By cable up to 500 m (1500 f)
    • By microwave Scorpio Radio System.
    Scorpio heads all have the updated Gyros and HD slip rings.
  • Not Available at this time

    OVERVIEW:
    The Libra Remote Head is a 3 axis digitally stabilized camera mount. Due to it’s compact size and durable nature as well as its ability to be applied to a wide variety of platforms such as cranes, camera vehicles, cable rigs, and boats. The Libra Head is considered to be the industry standard in stabilized remote heads.

    Libra Head Package Includes:

    1 Libra Stabilized Remote Head 1 Preston FIZ Lens Control 4 30vdc Block Batteries 1 Yeager Cart

    Additional Accessories:

    – Libra long range wireless operation kit – Libra Head Mini Kit – Libra Head 3D Kit (Pace, Paradise, ET, 3ality) – Pan Bar System – Joystick
    APPLICATIONS:
    The Libra Head is one of the most versatile stabilized mounts available. It will carry just about any motion picture Film or HD camera system including some Imax and Vistavision. Recently 3D adapter kits were designed and successfully integrated into the Libra system. It would be nearly impossible to list everything the Libra has ever been mounted to. This list contains some of it’s more common uses. – Telescoping cranes – Jib Arms – Akela / Strata Cranes – Dollies – Cable Rigs – Camera Cars – Motorcycles – ATV’s – Motorized Arm Cars – Boats – PWC’s – Helicopters
  • OVERVIEW:
    With powerful integrated motors and high-resolution digital encoders, the MoSys Lambda Digital Remote Head provides the instantaneous feel of direct drive and smooth operation. Catering for the bigger camera packages up to of 120 pounds. Initially, the Lambda was designed as a motion control head, where zero backlash and accuracy is a must. The head is based on the highly successful fluid Lambda head from Cartoni. The manufacturer kept all the specifications that Cartoni gave the Lambda, like it’s tool-less adjustability, it’s compactness and ability to expand into a “bigger head”, and it’s low-mode capability that allows the camera to skim just above a surface.
    APPLICATIONS:
    -Telescoping cranes -Fixed arm cranes -Dollies -Hard mounts
  • OVERVIEW:
    From a design team with over 75 years of award winning industry experience: an affordable, full featured, mid-size, rugged and lightweight remote head. Designed for HD, film & broadcast camera systems. Full function remote with hand wheel option.
    • 210 degrees per sec. w/ 35lb camera
    • Full slip-rings for continuous 360° motion
    • Virtual set capable, multiple configurations
    • Easily configured for over or under-slung
    • Manufactured and assembled in the U.S.A.
    Standard Features: Record and move to up to 2000 marked positions Record and playback up to 1 hour and up to 2000 takes Programmable maximum speeds for each axis Programmable smoothing for each axis Precise homing via operator command Up to 2500 feet between controller and head Programmable motion limits Servo tuning from remote console Fujinon and Canon serial lens control Camera synchronization Extremely rigid with precise smooth motion for long lenses Joystick wheel control for Pan, Tilt and Zoom; knob control for Focus Share recorded data with laptop: streaming and upload & download Optional Features: Direct connection (head to KuperNode for motion control & virtual set applications) Motion capture package for additional recorded axes Preston lens control interface allowing recording and playback Encoded pan bar interface Encoded hand wheel interface Intervalometer operation Custom lens control interfaces Water tight shipping case Standard package: Two axis Talon remote head Talon remote controller Remote head power cable – 30 ft. Control cable – 50 ft
  • OVERVIEW: Handwheel, joystick and panbar operating systems Fully Encodable Broadcast ready Various camera cars Will support most 3-D rigs, remote heads and cameras Skilled and professional technicians
  • OVERVIEW:
    The MB45 is a relatively versatile telescopic crane suitable for any film set or TV studio as this crane has the same dolly ‚footprint’ as the smaller MB30 crane. It is universal to work with and depending on the type and weight of camera package carried it is possible to modify the length and reach of the arm from 35 feet to 45 feet in a matter of minutes. Owing to the cranes small weight and size when disassembled it can be transported in a standard 16 ton truck or a bespoke trailer. The Mb45 is currently the most desired telescopic crane available on the market today.
  • OVERVIEW Louma 2 is the new generation of telescopic Camera Cranes. Shot Assist software co-ordinates the Telescopic Arm and Remote Head to achieve previously unimaginable shots. We are continously developing new, ground breaking functions never seen before in any other remote crane system. Most recent of these development are - Setting of the straight line plane at the single push of a button in the direction that the camera lens is pointing : Graphic display of the planning function : Adjustment of the plane angle at the touch of a button - horizontally or vertically : Horizontal straight line ` ceiling` plane : Adjustable `S` curve dampening when telescoping into a set arm limit : Real time Camera Lens Height display : Variable Smart Tilt function to assist the camera operator when shooting fast vertical moves .
  • OVERVIEW: Handwheel, joystick and panbar operating systems Fully Encodable Broadcast ready Various camera cars Will support most 3-D rigs, remote heads and cameras Skilled and professional technicians
  • OVERVIEW:
    The Scorpio 23´ is the first of a series of telescopic cranes that Servicevision is designing to have soft, silence and effective camera movements true telescopic arms. To be more rigid and uniformed, the arms are made with aluminium extrusion. The arms are guided true wheels in top and bottom to be more stable, and moving with two lateral cables. Like this the adjustment of the cables is simpler and is twice safety. But, if something is creating a big reputation to these cranes is the size of the arm and the size of the dolly. With the new adjustment of the wheels arms is possible to go true doors of 80cm wide, and only is necessary a diameter of 3,5 m (11´) to move an arm of more than 7 m (23´)
  • SteelBoy is a new generation of camera cranes. SteelBoy being lighter and easy to dismantle and reassemble is ideal for use on small and large sound stages, also because of its rigidity it is perfect for usage on a tracking vehicle. The crane can be mounted to any platform via standard Mitchell flat base. The crane can take power from AC or DC (battery) sources.
  • OVERVIEW: As the smallest telescopic camera crane available, the Super Techno 15 is the ideal solution for location and tight area shooting. The crane can fit into most standard residential and commercial doorways. As well as the perfect match for a tracking vehicle. For this crane a technician is needed.
    Download Specs
  • OVERVIEW:
    • 4′ 5″ – 8′ 5″ Reach
    • 3 Rolling Cases
    • 2 Weight Carts
  • OVERVIEW: The GF-8 Crane System is an industry standard in modular rideable and remote cranes. It‘s versatile, durable and provides unmatched ease of movement and steady crane moves. The simple rigging assembly and fast set up make the GF-8 extremely popular. By adding the Xten Kit, the standard GF-8 crane can be extended to a GF-8 Xten Crane providing extra height and lift range.
    Download Specs
  • OVERVIEW:
    Simple and Compact The HME DX100 system delivers crystal-clear, two-way communications in a compact, portable base station for up to 15 simultaneous wireless users. Hands-free mode allows maximum flexibility and a secure channel ensures that private conversations stay private. The portable, compact design makes the DX100 system ideal for mobile field applications. Up to 15 COMMUNICATOR®s can be assigned to each base station, four of which can be used in hands-free, full duplex mode. Digital Frequency-Hopping Spread Spectrum (FHSS) with encryption secures communication to prevent eavesdropping. Triple diversity — space, time and frequency diversity provide redundant communication that offers the most dependable system available. Remotely “unlatch” COMMUNICATOR transmitters to help you stop a COMMUNICATOR that has been unintentionally left transmitting — from the convenience of your base station. This is very helpful if a remote user removes his COMMUNICATOR and forgets to turn it off.
  • OVERVIEW:
    The Preston FIZ system sets the industry standard for lens control. It controls all lens and camera functions. The system is modular, giving the user a wide range of choices from a basic cable connected system, to a fully wireless microwave system. The Preston FIZ system consists of the Hand Unit, Motor Driver, Digital Motors, optional Microwave Link, cables and motor mounting bracket.

Go to Top